AU has arrived!

I leave today to fly to Vegas for Autodesk University 2009. Just a quick note before I go. All of the papers were uploaded to the respective class listings. You can go to your agenda, click on a class link and at the top right you will see a link for the class materials. Last night I added datasets to several of my classes. If you are signed up for one of my sessions and want to download, be sure to check these out. I also updated my papers (resaved the PDFs) apparently some folks were having trouble opening them.

If you are going to AU, please stop by one of my classes and say hello. If you are not signed up for any of my classes, you can read about my FIVE sessions here. I also blogged about them a few weeks ago here.

Hope to see you all there! Thanks.

Where have I been?

The next time I agree to do three books in one season, someone please try to talk me into my senses. WOW. This is a A LOT of work. So you figure, hey, how bad can it be, two revisions and one new title... yeah right.

OK, so here's the status. Mastering Revit Architecture 2010 is DONE. It is available now and you can visit my website to purchase.

Mastering AutoCAD Architecture 2010 is in Copy Edit and Proof. I am reviewing Copy Edit of Chapters 10, 16, 17 and 18 right now. I should have those posted back to the production folks tomorrow. We have already finished Chapters 1 -9, and 12 and 13. So the only Chapters I still need to see in Copy Edit are 14 and 15. (Yes we sometimes work out of order). Proofs are moving a little more slowly. I have only seen two chapters in Proof so far, but I am told that many more are expected soon. We have an ETA for this book of sometime in October. I will update the progress here when I know more. You can learn more and order here.

The book that is taking all of my time right now is the brand new title. Mastering AutoCAD MEP 2010. As I noted in a previous post, I am authoring this book with three industry experts: Martin Schmid, Gregg Stanley and Darryl A. McClelland. Darryl is my SME for Mechanical and HVAC, Gregg for Plumbing, Piping and Content Builder, Martin is Electrical, Content, and Programming. These guys are top notch professionals. However, it is quite a challenge to take four very different writing styles and make it all sound like one voice.

The basic process we have established goes like this: we devised a table of contents. Then we split the chapters up between us by area of expertise. Everyone goes off an works on their first draft and then sends them to me for as what one of my previous co-authors (Jim Smell) called it: "Word smithing." Sounds great until you realize that three guys can write faster than one guy can review. So at the moment, I am the bottleneck on this project. They have all pretty much finished their first drafts. They are now waiting patiently for me to send them bloodied reviews. :-)

This process is taking me quite a while. As many of you may know, my background and expertise is architectural, so I am learning MEP, learning about engineering and writing / rewriting these chapters as I go. However, it is moving very swiftly now. We have the Quick Start, and Chapters 1 - 7 in to Tech Edit. I am finisihing Chapters 9 and 10 this weekend. Chapter 8 will follow. That will leave 11 - 15. We have two chapters in to Copy Edit. More to follow soon. So there is still plenty of work to do, but everyone is busy and things are moving. Our goal with this book is to have it ready in time for Autodesk University. All four of us will be moderating a panel at AU. It is a 90 minute session call AutoCAD MEP Ask the Experts. If you are going to AU, drop by and join the session.

Well, that is all I have for now. I have to get back to editing chapters.

Mastering AutoCAD Architecture

I am happy to report that the latest update to Mastering AutoCAD Architecture is well under way. The 2010 edition shoudl be available later this Fall. You can see the table of contents and ordering information on the newly posted book page.

I have several chapters "in the can" already. The Quick Start (Chapter 0) through Chapter 5 are complete through copy edit. I will post my comments on these first six chapters back to the editor on Monday. Chapters 6 through 9 are finished through technical edit and I await the copy edit on those. Chapters 11 through 15 and Chapter 17 are completed manuscript and in the hands of the tech editor. The manuscript for Chapters 10, 16 and 18 are in progress. Several of the appendices are underway as well. So, even though I have not posted here on this book earlier, as you can see the project is well underway and we are hoping to have a bound book in a few months. Maybe October or November.

I would like to thank David Koch. David has been assisting me in getting the new manuscript ready for publication. You may know David from the Autodesk News Groups. He is a very active member of the AutoCAD Architecture forum and a registered Architect practicing at the firm Ewing Cole in Philadelphia. Thanks David. I could not have gotten this far or even had hoped to get this update done without your assistance.

Please post comments here if you have any questions.

AutoCAD MEP 2010 Book in Progress

Being the glutton for punishment that I am, I have signed on to write my third book this year!

I have teamed up with three industry experts to write Mastering AutoCAD MEP! The first edition of this book should be published this fall. We expect to have it available in time for Autodesk University and hopefully several weeks before. As many of you may know, by background and experience is in architecture.

Therefore I have teamed up with three top-notch professionals in the MEP space for this project:


Darryl McClelland has 19 years of practical design in MEP engineering. Although his primary focus was the design of mechanical systems, he spent 11 of those 19 years designing electrical and plumbing systems’ as well. He also ran his own engineering business for 8 years. His design experience ranges from complex research laboratories and institutional facilities to medical and professional office buildings, and everything in between. He is a graduate of Purdue University and an active member of ASHRAE and ASPE.

Martin J. Schmid, P.E. has worked with Autodesk for the past four years working on site with customers to implement best practices using AutoCAD MEP and Revit MEP. Prior to joining Autodesk, Martin worked in a variety of roles in a variety of architecture and engineering firms, including electrical designer, engineering coordinator, and application developer. Martin has a Master's Degree in Architectural Engineering from Kansas State University, and a Masters in Business Management of Technology from the University of Texas in San Antonio. Martin has used AutoCAD since version 10, and has developed custom applications built on top of AutoCAD MEP extending the capability to suit the specific niche needs of customer applications. Martin has a beautiful wife and two lovely daughters, and works from his home in San Antonio, TX.

Gregg Stanley has over 22 years experience in Mechanical Process Design focused on Water Wastewater treatment systems using AutoCAD based solutions since Release 1.1. Gregg has also been in the position as a CAD Manager responsible for developing and instituting company specific customized applications, CAD standards and training. He has written and presented several training classes on AutoCAD and AutoCAD MEP both internally to coworkers, as a independent consultant and at Autodesk University. Gregg's current position is at Autodesk as a Quality Assurance Analyst and with Product design as a Piping Subject Matter Expert for AutoCAD MEP focused on the Piping application. Gregg is responsible for working with the larger development team and a Usability / Interaction Designer to redesign the 3D piping application and for quality assurance and quality control of several AutoCAD MEP features.

I am very excited to be working with this fine group of experts and look forward to having the book available soon.

Here is a quick look at the (preliminary - i.e. subject to change) table of contents:

Preface

Section I Introduction and Methodology
Quick Start General Overview
Chapter 1 User Interface
Chapter 2 Conceptual Underpinnings of AutoCAD MEP
Chapter 3 Project Navigator

Section II Working with MEP Objects
Chapter 4 Energy Analysis
Chapter 5 Mechanical Systems
Chapter 6 Piping Systems
Chapter 7 Electrical Systems

Section III Content and Display
Chapter 8 Content Creation - Styles
Chapter 9 Content Creation - Equipment
Chapter 10 Content Creation - Fittings
Chapter 11 Display Control (Advanced)

Section IV Drawing Documentation and Coordination
Chapter 12 Sections
Chapter 13 Managing Updates and Interference Detection
Chapter 14 Annotation, Property Sets and Schedules
Chapter 15 Plotting and Publishing

Section IV Appendices
Appendix A Online Resources
Appendix B Tips and Tricks
Appendix C Network issues, WAN

New Edition of Mastering AutoCAD Architecture

Having skipped the 2009 release, there has been a bit of a hiatus, but I am happy to say that the new edition of Mastering AutoCAD Architecture is well underway. The book remains 18 chapters plus appendices. This new completely revised edition will cover all of the topics of previous editions and is fully updated to utilize the new 2010 interface and ribbon. Chapter 1 through 6 have already been completed through tech edit. The manuscript for Chapters 7 through 9 and 13 through 15 are currently finished and in the hands of the tech editor. Those should be flowing through to the copy editor soon. Chapters 10 and 17 are currently in manuscript edit. For this edition, I have enlisted the services of David Koch to assist with manuscript edit. David is a long time member of the ACA user community and helps moderate the Autodesk ACA discussion forum. David has provided invaluable assistance to me in helping get these chapters updated quickly. At the current rate, we hope to finish the remaining manuscript by the end of the month and hopefully tech and copy edit shortly after that. That puts us well on track for a late summer, early fall release. I will post back here with more details as they become available.

Windows 7 (RC1) is available

Windows 7 Release Candidate 1 (RC1) is available. I have downloaded it and installed and spent about 45 minutes noodling around.

http://www.microsoft.com/windows/windows-7/

I have not installed Autodesk software yet. Usually, when I build a new system, I install OS, patch it, reboot, patch it again, reboot, patch it again... (you get the idea) and then build an image of the clean OS. Then I add all my business apps. (Office, Photoshop, CD software, utilities, etc). Patch all those then make another image. This is my clean system before Autodesk software. I then install my Autodesk stuff.

For Windows 7, I am going to approach a little differently. I think I am going to install only the necessary business apps, then go right to Autodesk software so I can test it out. I have two hard drvies on my system, so I set up dual boot. I might be crazy, but I am actually contemplating doing some of my book chapters on Windows 7...

I stuck with 32bit for now, but I am also considering downloading and installing 64bit as well. Don't have a third hard drive, so I would have to re-image for that.

Anyone else tried Revit or ACA on Windows 7 yet?